|
|
Micro Switch
"Q"
 
Best suited for a wide variety
of uses, such as office equipment, telecommunication equipment
and audio equipment |
HIGH
QUALITY AND LOW PRICE
Embodying the so-called "lighter, thinner, shorter
and smaller" product concept, TORX MICRO SWITCHES have realized
micro-order precision, product miniaturization and cost reduction
with our fully automated production lines
GOOD
SNAP ACTION
Leaf
springs undergo no bending work load in the production process.
So, good snap action ensured and spring characteristics can be
utilized to the full. All these innovations have contributed
to the high performance and great reliability of TORX MICRO SWITCHES
VERIETY OF TERMINALS
Straight terminal, Right angled
terminal, Left angled terminal
RATING
TYPE
(contact) |
OF
(MAX) |
RATING
|
|
|
|
|
|
|
|
|
* OF is max of lever type. |
|
ITEM |
PERFORMANCE DATA |
|
Service life Mechanical |
Over 500,000 cycles
(Switching
frequency: 60 cycles/min., O.T. 100%) |
|
Service life Electrical Standard
type |
Standard OF: Over 30,000 cycles
(rated load)
(Switching frequency: 20 cycles/min.,
O.T. 100%) |
|
Service life Electrical Micro load
type |
Over 100,000 cycles (rated load)
Switching frequency: 20 cycles/min., O.T. 100%) |
|
Insulation resistance |
Over 100MW
When
measured with 500VDC insulation resistance meter) |
With-
sstand Voltage |
|
Between non-consecutive terminalsxx |
Between each terminal and discharged
metal parts
|
Between each terminal and earth
xx
|
|
|
500VAC, 50/60Hz, 1min.
xx
xxx
|
500VAC, 50/60Hz, 1min
xx
xxx
|
500VAC, 50/60Hz, 1min
xx
xxx
|
|
|
Vibration resistance |
Multi amplitude 1.5mm, 10-55Hz
Less than 1 msec. for contact opening) |
|
Impact resistance |
50G
less than 1
msec. for contacting opening |
|
Contact resistance |
less than 15mW (initial
value) |
|
Allowable operation speed (non-load) |
0.1mm/s-0.5m/s (for push button
type) |
|
Maximum switching frequency |
60 cycles/min, mechanical |
|
Operating temperature and humidity
ranges |
-25 degree-C to 80 degree-C (not
frozen), less than 85% RH |
|
 |
 |
|
Operating Characteristics |
Standard Type |
|
Operating Force MAX (g) |
90 |
|
Release Force MIN(g) |
8 |
|
Pre-travel MAX(mm) |
0.35 |
|
Over-travel MIN(mm) |
0.1 |
|
Movement Differential MAX (mm) |
0.07 |
|
Operating Position (mm) |
5.6±0.15 |
|
 |
 |
|
Operating Characteristics |
Standard Type |
|
Operating Force MAX (g) |
50 |
|
Release Force MIN(g) |
4 |
|
Pre-travel MAX(mm) |
1.3 |
|
Over-travel MIN(mm) |
0.3 |
|
Movement Differential MAX (mm) |
0.6 |
|
Operating Position (mm) |
6.7±0.5 |
|
|
|
